ULTRAKUSTIK-TAPE M100 is a soundproof glass fiber tape, reeled in a roll. The structural noise insulation is provided by the elastic properties of the porous fibrous texture of the material. This provides the stable physical and mechanical characteristics of the liner when exposed to static and dynamic loads, as well as the preservation of the declared acoustic properties during a long service life.
ULTRAKUSTIK-TAPE M100 is a fiberglass-based sound insulation tape. It is available in rolls of 30 m. The size of the tape is 4×100 mm. The elastic properties of fiberglass and the availability of air pores provide the unique damping performance of ULTRAKUSTIK-TAPE M100.
- Multilayer fiberglass with a chaotic pattern of fibers
- C-type fiberglass
- Protection against structural noise with a low thickness;
- Resistance to loads of various intensity;
- Long service life;
- The price of ULTRAKUSTIK-TAPE M100 corresponds to its performance.
SIZE AND WEIGHT
|Tape width||Roll length||Thickness||Area density||Roll weight|
|10 cm||30 m||4 mm||300 g/m2||1 kg|
Dynamic modulus of elasticity Ed: 0.18 MPa with a load of 2 KPa, 0.35 MPa with a load of 5 KPa.
Relative compression ratio εd: 0,25 with a load of 2 KPa, 0,35 with a load of 5 KPa.
When installing ZIPS sandwich panels, the ULTRAKUSTIK-TAPE M100 tape liner is laid in two layers in the places of their contact with the floor, as well as in the places of contact between the panels and side walls and the ceiling. When mounting frame partitions and lining, the ULTRAKUSTIK-TAPE M100 material is applied between frame profiles (fasteners) and supporting building structures. Tapes of ULTRAKUSTIK-TAPE M100 material are also used at the junction points of facing sheets of a partition (lining) with other building structures.